Description
Gate Check
- identifier: LSAW Carbon Steel Pipe for Offshore Platform Structures → 非空，通过。
- 数字之和计算：取 identifier 中无明显数字，按规则视为 0 → 方向 0（工厂直销无中间商）。
—
Factory-Direct LSAW Pipe Supply — JCOE/LSAW carbon steel pipes produced on dedicated lines with no broker markup, shipped with original MTC per heat number.
Technical Specifications
| Parameter | Value |
|---|---|
| Designation | LSAW Carbon Steel Pipe for Offshore Platform Structures |
| Product Type | Round Steel Pipe (JCOE / LSAW) |
| Steel Grade | Q235, Q345B, Q345C, Q345A, Q195, Q215, ASTM A53A, A53B, A106B, API 5L Gr.B, X42, X46, X52, X60, X65, X70, X80, X100, ST37, ST37-2, DIN 1629 ST35, ST45, DIN 17175 ST35.8, 19Mn5, 16Mn, 15CrMo, Cr5Mo, 10CrMo910, 12CrMo, 13CrMo44, 30CrMo, A333 GR.1–GR.7, T1, T2, T5, T9, T11, T12, T22, T91, T92, P1, P2, P5, P9, P11, P12, P22, P91, P92 |
| Standard | API 5L, ASTM A53, A106, A178, BS, DIN 1629, DIN 17175, GB, JIS |
| Section Shape | Round |
| Size Range | OD 21.3–1420 mm |
| Wall Thickness | 2.11–300 mm |
| Length | 6 m / 6.4 m / 12 m (or as required) |
| Technique | JCOE / LSAW (Longitudinally Submerged Arc Welded) |
| Surface Treatment | Black / Oiled / Non-oiled |
| Tolerance | OD ±1%, WT ±10% |
| Ends | Plain / Beveled (as required) |
| Application | Offshore platform structures / Fluid transport (oil, gas, water) / Structural fabrication / Pipeline engineering / Pressure systems / Industrial construction |
| MOQ | 1 Ton |
| Origin | Shandong, China |
Application Suitability
| Industry | Typical Applications |
|---|---|
| Offshore & Marine | Jacket structures, subsea pipeline risers, platform deck supports |
| Oil & Gas Transmission | Onshore and offshore trunk lines, gathering pipelines, flow lines |
| Industrial Construction | Pressure vessel nozzles, process piping, boiler feed lines |
| Infrastructure & EPC | Bridge piers, pile foundations, heavy-load structural columns |
| Power & Petrochemical | Steam lines, heat exchanger tubes, refinery process piping |
What Negative Tolerance on Wall Thickness Really Costs an Offshore Project
A pipe that measures 1.5 mm under spec on arrival does not just fail inspection — it delays the entire jacket load-out and triggers contractual penalties.
In offshore platform procurement, wall thickness is not a paper figure. It is the single most re-measured dimension on the quayside before any lifting gear touches the pipe. When actual WT drifts beyond the allowed negative tolerance, the entire batch can be rejected even if the chemical composition and weld seam pass lab tests. [NEED_CITE: API 5L dimensional tolerance requirements for line pipe] The cost is never just the pipe itself — it is the idle crane time, the re-ordered heat, and the rescheduled sailing window.
Fragmented sourcing makes this worse. Buying JCOE pipes from one mill and flanges from another, without a single party verifying heat-to-heat consistency, is how projects discover mismatched MTCs at the port of discharge. [NEED_CITE: traceability and heat number requirements in offshore steel procurement]
Matching Large-Diameter LSAW Pipe to Offshore Jacket Loads
Offshore jacket structures demand pipes that can carry axial compression, resist wave-induced bending, and survive decades of saltwater exposure. The JCOE forming process used for these LSAW pipes produces a roundness profile that fits directly into node connectors without excessive local grinding, while the submerged arc weld seam delivers uniform penetration across the full wall thickness — critical when the pipe transitions from splash zone to buried section. With OD reaching 1420 mm and WT up to 300 mm, the JCOE LSAW Carbon Steel Pipe for Offshore Platform Structures covers the full range from secondary bracing to main leg members on mid-size platforms.
Engineering Compliance and Certification Pathways
Offshore projects in the North Sea, West Africa, or Southeast Asia typically require compliance with API 5L for pipeline sections and EN 10210 / EN 10219 for structural hollow sections, depending on whether the pipe carries fluid or acts as a compression member. [NEED_CITE: EN 10210 hot-finished structural hollow sections vs API 5L line pipe application scope] CE marking under EN 10210 is mandatory for structural steel entering the EU, while SONCAP and SABS govern Nigerian and South African imports respectively. Beveled ends per API 5L or custom groove profiles can be machined at the mill to match the welding procedure specification on site, reducing field rework. The ±1% OD and ±10% WT tolerance band aligns with standard offshore fabrication tolerances, but each heat must be verifiable against its MTC before the jacket goes on the barge.
Steel Grade Selection and JCOE Process Fundamentals
The API 5L grade ladder — from Gr.B through X42, X52, X60, X65, up to X80 and X100 — reflects increasing specified minimum yield strength, allowing designers to reduce wall thickness and overall weight for the same design pressure. For offshore jacket legs in deep water, X65 and X70 grades offer the best balance of strength and weldability, while X100 is reserved for ultra-high-pressure transmission lines where weight savings justify tighter welding controls. The JCOE process — J-forming, C-forming, O-forming, and Expansion — progressively shapes the plate into a round tube before the final submerged arc welding pass, ensuring that the weld seam meets the same ultrasonic and radiographic examination standards as the parent metal. ASTM A53 and A106 grades cover general service and high-temperature applications respectively, while DIN 17175 alloy grades such as 13CrMo44 and 10CrMo910 serve creep-resistant service in power and petrochemical plants. Wall thickness up to 300 mm is achievable on dedicated heavy-wall JCOE lines, but the ±10% WT tolerance means that a nominal 20 mm pipe can legally measure 18 mm — which is why independent inspection matters more than the mill’s own certificate alone.
The Hidden Cost of Unverified Pipe on Offshore Projects
Specifying API 5L X65 and receiving material that tests as X52 does not show up in the container — it shows up during the hydrotest, or worse, during the first storm season. [NEED_CITE: consequences of steel grade substitution in offshore structural members] Missing or incomplete MTC documentation delays customs clearance in the Middle East and West Africa, where port authorities routinely hold steel shipments until the heat number on the pipe matches the certificate presented. Negative tolerance beyond the contractual limit forces the fabricator to either reject the pipe or redesign the connection — both options cost more than paying a modest premium for verified material upfront.
Why Project Buyers Source LSAW Pipe Through Us
We run three dedicated production lines in Jinan with a combined monthly capacity exceeding 20,000 tons, meaning your JCOE LSAW Carbon Steel Pipe for Offshore Platform Structures is rolled, welded, and inspected under one roof — no trading company markup, no third-party mill allocation. Every heat carries an original MTC traceable to the ladle, and our in-house lab performs three-stage inspection covering chemical composition, tensile properties, and Charpy impact testing before the pipe ever reaches the loading bay. For buyers who need independent verification, we arrange SGS or BV inspection at the mill on request, with the report issued before the container is sealed. Our inventory covers 2,800+ standard specifications across round, square, rectangular, and section steel, so a single order can consolidate jacket legs, bracing pipes, and pile sections into one shipment — reducing documentation, customs entries, and port handling charges. We have supplied platform structures and pipeline projects across 50+ countries, and our export team handles the full paperwork stack including CE certificates, packing lists, and certificates of origin tailored to the destination port’s requirements.
Documentation & Compliance
- Mill Test Certificate documenting API 5L X65 chemical composition, yield strength, and Charpy impact values per heat number
- CE certificate under EN 10210 / EN 10219 for structural hollow sections entering EU markets
- ISO 9001:2015 quality management certificate covering the full JCOE production and inspection process
- SGS or BV third-party inspection report issued before loading, covering dimensional check, weld seam NDT, and coating thickness
- Full material traceability from heat number on pipe end to MTC and mill test record
- Customs documentation package including packing list, bill of lading, certificate of origin, and SONCAP / SABS where applicable
Packaging, Loading & Delivery
- API 5L X65 and X70 pipes bundled with steel strips and edge protectors to prevent coating damage and ovality during ocean transit
- Black / oiled surface treatment applied before bundling to prevent rust formation during storage and shipping
- 12 m length pipes loaded in dedicated 40ft OT or flat-rack containers with optimized stowage plans to maximize payload per shipment
- Beveled ends protected with plastic caps to preserve groove profile for field welding
- Heat number and steel grade stenciled on each pipe end for on-site traceability and MTC cross-reference
- FOB, CIF, and DDP terms available with door-to-door logistics coordination to major offshore supply bases
Getting a Verified Quote for Your Offshore Pipe Package
Send your specification list — OD, WT, length, steel grade, quantity, and destination port — and we return a factory-direct quotation with volume pricing, typical production lead times, and the full documentation package within 12 hours. For non-standard dimensions or alloy grades such as 13CrMo44 or P91, we provide a custom rolling schedule and confirm whether the required quantity meets the minimum mill run.
Frequently Asked Questions
Q: Can you supply API 5L X65 and X70 pipes with Charpy impact testing at minus 20°C?
A: Yes. We perform Charpy V-notch testing per API 5L and project-specific requirements, and the results are recorded on the MTC for each heat.
Q: Do you provide third-party inspection before loading?
A: SGS and BV inspections are available on request. The inspection covers dimensional verification, weld seam NDT, and MTC cross-check, with the report issued before the container is sealed.
Q: What is the minimum order quantity for JCOE LSAW pipes?
A: The MOQ is 1 ton per size, and we support split shipments across multiple sizes in a single container to consolidate your procurement.
Q: Can you supply beveled ends per API 5L for field welding?
A: Yes. Plain and beveled ends are both available, and we can machine custom groove profiles to match your welding procedure specification.
Q: Do you handle CE certification for EU projects?
A: All structural pipes carry CE marking under EN 10210 / EN 10219, and the certificate is included in the shipping documentation package.
Get Factory-Direct Pricing with Full MTC Documentation
Send your specification list — OD, WT, length, steel grade, quantity, and destination port — and receive a detailed quotation with mill test certificates and third-party inspection options within 12 hours.
Shandong Xin Jiyuan Special Steel Tube Co., Ltd
Website: www.sdxinjiyuan.com
Mobile/WhatsApp/WeChat: +86 188 5315 7756
Email: admin@sdxinjiyuan.com
